ERMANI Hiper-200AT — Press for the production of bricks, blocks, and paving tiles
ERMANI Hiper-200AT
Universal hydraulic press. For the production of small-piece concrete products by the method of semi-dry pressing. The equipment is designed for pressing classic bricks, 3D bricks (like Lego), hollow bricks, solid, decorative, as well as large-sized products: 3D building block (like Lego), classic building block, hollow block. As well as paving slabs of different sizes and types.
Technical specifications
| Parameter Name | Value |
|---|---|
| Pressing force (double-sided) | 400 tons 200 tons + 200 tons |
| Hydraulic system pressure: nominal / maximum (MPa) | 18 / 24 |
| Machine dimensions and weight: Length, width, height (mm) Weight (kg) |
2000 - 1800 - 2500 4550 |
| Production per cycle: Bricks / Blocks / Paving tiles |
4 // 2 / 5 |
| Cycle duration (seconds) | 18 // 24 |
| Productivity (pieces/hour) | 800 // 300 / 1000 |
| Electric motor power (kW): working / maximum | 9 / 21 |
| Operating mode: Mixture loading into chamber |
automatic |
| Product forming | automatic |
Advantages of ERMANI presses
Replacing forms
The forms are made of wear-resistant steel and also undergo special heat treatment, which allows them to withstand 200-300 thousand work cycles.
A simple and clear system for replacing forms on the press will allow any operator to perform a replacement within one to two hours.
Products with a height of up to 90mm, 200mm and higher
An additional option makes it possible to press products up to 200 mm high, thanks to the increase in the height of the frame with all the guides, the volume of the dispenser, and the stroke of the cylinders, which allows pressing products with a large height and voids vertically.
On one press it is possible to replace moulds with different volumes and press products with different heights, for example: bricks with a height of 90 mm and building blocks up to 200 mm.
Products with a height of up to 90mm, 200mm and higher
An additional option makes it possible to press products up to 200 mm high, thanks to the increase in the height of the frame with all the guides, the volume of the dispenser, and the stroke of the cylinders, which allows pressing products with a large height and voids vertically.
On one press it is possible to replace moulds with different volumes and press products with different heights, for example: bricks with a height of 90 mm and building blocks up to 200 mm.
Automatic product gripping
With desktop takeout
The most inexpensive way of automatic system of output of products to the working table. (included in the price of standard complete set).
Description: The finished pressed product comes out of the forming zone upwards, the sleeve with the help of pneumatic cylinders grabs the product, carries it forward to the working table, which goes down, simultaneously the next pressing cycle starts.
Lift — elevator for stacking in several rows vertically
The additional option includes the same operating principle as the conventional automatic product gripper, but includes the ability to stack products vertically in several rows (bricks 5 rows, blocks 3 rows), then the assembled products are transferred forward along special horizontal mechanisms, freeing up space for the next assembly cycle. (Special pallets are required for stacking).
Stacker robot — for stacking in several rows vertically and horizontally
The stacker robot is a fully automated system for removing products and stacking them on a process pallet, which must be taken to a warehouse for storing finished products. This option minimizes the amount of labor, but requires large initial investments.
Mechanics
The mechanical elements of the press are made of thickened materials with a reserve. To withstand the high pressure provided on the hyperpress.
Simple and reliable mechanics of moving elements. We use only hardened columns, ground moving plates, as well as bars, bushings and other elements are protected from dust and dirt by special cuffs.
Pressure and control
Hydraulics
Reliable hydraulic components, time-tested, operate without failures for many years.
Easily available on the market in any city in the world. Replacement of components does not require the knowledge of a highly qualified specialist.
Automation
Easy-to-use automation. Time-tested components. Available in any market in the world.
Using a USB cable and the Internet, it is possible to change the program characteristics independently or remotely by our specialists.
Types of forms
