ERMANI hyper-500AT — Press for the production of bricks, blocks and paving slabs
ERMANI Hiper-500AT
Universal hydraulic press. For the production of small-piece concrete products by the method of semi-dry pressing. The equipment is designed for pressing classic bricks, 3D bricks (like Lego), hollow bricks, solid, decorative, as well as large-sized products: 3D building block (like Lego), classic building block, hollow block. As well as paving slabs of different sizes and types.
Technical specifications
| Parameter name | Meaning |
|---|---|
| Pressure, double-sided | 600 tons 300 tons + 300 tons |
| Pressure in the hydraulic system: nominal / maximum (MPa) | 18 / 24 |
| Machine dimensions, weight: Length, width, height (mm) Weight (kg) |
2300 - 2100 - 2800 5570 |
| Calculations: Number of products per cycle: brick / block / paving |
6-7 / 4 / 10-12 |
| Duration of one cycle (seconds) | 20-25 |
| Productivity (pieces / hour) | 1260 / 600 / 2160 |
| Electric motor power (kW) operating / maximum | 15 / 30 |
| Working mode: Loading the mixture into the chamber |
automatic |
| Product molding | automatic |
Advantages of ERMANI presses
Replacing forms
The forms are made of wear-resistant steel and also undergo special heat treatment, which allows them to withstand 200-300 thousand work cycles.
A simple and clear system for replacing forms on the press will allow any operator to perform a replacement within one to two hours.
Products with a height of up to 90mm, 200mm and higher
An additional option makes it possible to press products up to 200 mm high, thanks to the increase in the height of the frame with all the guides, the volume of the dispenser, and the stroke of the cylinders, which allows pressing products with a large height and voids vertically.
On one press it is possible to replace moulds with different volumes and press products with different heights, for example: bricks with a height of 90 mm and building blocks up to 200 mm.
Automatic product gripping
Elevator lift
Included in the price of the standard package. The finished pressed product leaves the molding zone upwards, the sleeve with the help of pneumatic cylinders grabs the product, carries it forward to the working table, which is lowered down, simultaneously the next pressing cycle is started.
Mechanics
The mechanical elements of the press are made of thickened materials with a reserve. To withstand the high pressure provided on the hyperpress.
Simple and reliable mechanics of moving elements. We use only hardened columns, ground moving plates, as well as bars, bushings and other elements are protected from dust and dirt by special cuffs.
Pressure and control
Hydraulics
Reliable hydraulic components, time-tested, operate without failures for many years.
Easily available on the market in any city in the world. Replacement of components does not require the knowledge of a highly qualified specialist.
Automation
Easy-to-use automation. Time-tested components. Available in any market in the world.
Using a USB cable and the Internet, it is possible to change the program characteristics independently or remotely by our specialists.
Types of forms
